brother printer error 30

How to fix Brother Printer Error code 30?

Today we will discuss about how to fix Brother printer error 30 problem. Did you got an error 30 on your brother printer? Don’t worry you will be able to fix by end of the blog. We will let you know about the source of the problem also.

Why error 30 happens in brother printer?

The brother printer `s error 30 will make your printer work slow.  There are some reasons behind  this error. Some of them are mentioned below:
  • The brother printer `s error 30 will make your printer work slow.  There are some reasons behind  this error. Some of them are mentioned below:
This main reason of error 30 take place because printer head cartridge fails that comes back to its initial position to the extreme right of the unit.
  • This issue can also occur if the components on each side of the carriage are out of place.
  • The third cause of the reason because the cartridge covers that are not locked in appropriate way
If the error 30 is not solved as soon as possible then it will harm the machinery badly. Now, we will discuss about “How to troubleshoot  printer error code 30?

8 ways to fix error 30 on Brother Printer.

Are you going to print a urgent papers but your brother printer shows  “ Printer not activated, error code-30 “. This can be a serious problem you can solve this by reading and follow the procedure given in this blog.

But we suggest you to get an instant support from

Brother Printer Support : +1-850-250-3133

Solution no.1

  • open up the Cover of the printer

  • Discover the Button on the left and right side of the printer.

  • Move the print head to the Center.

  • Look at if there is any Dust Particles, residue or bits of paper present inside the printer.

Solution no.2

  • Hold the scanner cover by using the tabs of the cover.

  • Place it on the left or right side of the printer.

  • Slide the print head over to the right side under the cover to confirm cleaning up the whole encoder strip.

  • Clean up the encoder strip on both sides.

Note: Use lint cloth for cleaning

Solution no.3

  • Look at the position of encoder strip

  • If the encoder strip is not placed appropriately, then open the printer.

  • Take out the encoder strip

  • Now, put it back again properly

  • Restart the printer again and print

If the error 30 message is still there. Then please call the Brother Printer Support

Call ( +1-850-250-3133)