brother printer drum

How to Replace Brother Printer drum unit?

The Brother printer drum unit is an independent consumable, and it must be replaced after use of 4-5 toner cartridges. Are you using a brother printer? and your printer shows you “Replace Drum” written on your printer`s display. If you are getting this error, that means its to get a new drum. If you newly purchased your printer or you recently changed your drum unit. But still, this error persists, then try to reset your page counter. Every time you replace the drum unit, the print counter must be reset manually. Replacement procedures vary on the printer model. Today we will try to replace the drum unit of some best selling brother printers.
  1. Replace drum unit of Brother MFC-L2700DW printer.
  2. Change drum unit of Brother HL-L2380DW printer.
  3. Replace drum unit of Brother MFC-77360N printer.
  4. Change drum unit of Brother MFC-L2740DW printer.
  5. Drum unit replacement instructions for Brother MFC-L2750DW printer.
  6. Brother dr420 drum unit replacement.

Replace drum unit of MFC-L2700 Brother Printer Toner : TN660 toner cartridge Drum unit : DR630 drum unit

 Step1: First of all you have to remove the old drum and replace the new drum.
  • On the Printer and now, open the Front Cover.
  • Then remove the toner cartridge and drum unit.
  • Remove the toner cartridge from drum To remove the toner cartridge from the drum unit. Please push down the green lock lever.
  • Unbox the toner cartridge
  • Click the toner cartridge into the drum unit until. You hear it lock into place
  • Clean the corona wire. You will find the corona Wire inside the drum unit. And, you can change the corona wire by sliding from green tab form left to right and right to left for 4-5 times.
  • Insert the toner cartridge and drum back into the printer.

When the new drum is changed, its required to reset the drum counter:

  1. Open front cover of the printer.
  2. Press and the OK  for 2 seconds.
  3. Push the Up arrow key or 1 to reset the drum counter.

Replace drum unit of Brother HL-L2380DW printer. Toner : TN660 toner cartridge Drum unit : DR630 drum unit

  1. Power on the printer.
  2. Open up the head part and leave it open for couple of minutes, so that it can be cool down.
  3. Take out the drum unit & cartridge from the machine.
  4. Remove the toner cartridge from drum unit. To remove the toner cartridge from the drum unit, Please push down the green lock lever.
  5. Open up the drum Unit.
  6. Skate the toner cartridge into the drum unit so it locks into place. This action makes a click sound.
  7. Clean the corona wire. You will find the corona Wire inside the drum unit. And, you can change the corona wire by sliding from green tab form left to right and right to left for 4-5 times.
  8. Insert the both toner cartridge and drum unit together back into the machine.
When the new drum is changed, its required to reset the drum counter.
  1. Check the head cover is closed or not.
  2. Press the “X” on the printer to cancel “replace drum”
  3. Press the tool button (setting)> All Settings> Machine Info> Parts Life.
  4. Clasp down the # button and wait for the LCD message changes.
  5. Press “Drum” > Select “Yes”.
  6. Select the home button.

Replace drum unit of Brother HL-L2380DW printer. Toner : TN660 toner cartridge Drum unit : DR630 drum unit

  1. Power on the printer.
  2. Open up the head part and leave it open for couple of minutes, so that it can be cool down.
  3. Take out the drum unit & cartridge from the machine.
  4. Remove the toner cartridge from drum unit. To remove the toner cartridge from the drum unit, Please push down the green lock lever.
  5. Open up the drum Unit.
  6. Skate the toner cartridge into the drum unit so it locks into place. This action makes a click sound.
  7. Clean the corona wire. You will find the corona Wire inside the drum unit. And, you can change the corona wire by sliding from green tab form left to right and right to left for 4-5 times.
  8. Insert the both toner cartridge and drum unit together back into the machine.

When the new drum is changed, its required to reset the drum counter.

  1. Check the head cover is closed or not.
  2. Press the “X” on the printer to cancel “replace drum”
  3. Press the tool button (setting)> All Settings> Machine Info> Parts Life.
  4. Clasp down the # button and wait for the LCD message changes.
  5. Press “Drum” > Select “Yes”.
  6. Select the home button.
Call ( +1-850-250-3133)